Godlyke Powerall Review
| Date: | January 6, 2006 |  |
| Manufacturer: | Godlyke |
| Author: | Ned |
This review focuses on the Godlyke PA9 Power-All which is used to provide power to your effects
pedals. The simplest, most effective, most affordable method for powering your 9-volt effect units.
Advanced circuitry steps down high line voltages to 9-volts and automatically supplies the required
amount of current. 1.7 Amp current capability can power over twenty 9-volt effects.
The PA-9 Power-all System includes One x Cable-5 daisy chain connector, Two x 1/8" phone plug
jumper cables (Blue), Two x barrel-type reverse polarity jumper cables (Red), Two x battery clip
jumper cables (grey), One x Line 6 Modeler Cable (Green) and One x barrel-type extension jumper
cable (Black) for over-sized effect units.
Thoughts
So how good is this? For $40 from Musicians Friend
 you can power everything needed. For instance
with 1 Power-All I power my entire pedal board which contains: Vox Wah, StroboStomp, Maxon OD808,
Barber Silver LTD, Boss GE-7, Fulltone OCD, Boss DD-3 and a Line6 MM-4. All this and I saved over
$100 along with the space on my pedal board. As I move my pedals into a rack I will purchase
another Power-All simply to keep my wiring neat as I will have 2 pedal shelves (before amp and
in the loop).
I plug the Power-All into my power strip that is always positioned next to my amp. Power-All then
plugs into my PedalSnake with 2 daisy chains at the pedal board end along with the supplied
Line6 connector for the MM-4. As I move to the rack the MM-4 will be replaced with a Line6 Mod
Pro and a Line6 Verbzilla will be added in it's place.
I HIGHLY recommend the Godlyke Power-All to anyone that needs to power numerous pedals that require
different types of connectors and power conditions.
|
